cleanup sw req
This commit is contained in:
301
1 software design/Gap_analysis/Architecture_Gaps_Analysis.md
Normal file
301
1 software design/Gap_analysis/Architecture_Gaps_Analysis.md
Normal file
@@ -0,0 +1,301 @@
|
||||
# Architecture Gaps Analysis
|
||||
|
||||
**Document ID:** GAP-ARCH-001
|
||||
**Version:** 1.0
|
||||
**Date:** 2025-02-01
|
||||
**Project:** ASF Sensor Hub Software Architecture
|
||||
|
||||
## 1. Purpose
|
||||
|
||||
This document identifies and analyzes gaps discovered during the software architecture review and restructuring process. These gaps represent areas where additional requirements, components, or design considerations may be needed to complete the system implementation.
|
||||
|
||||
## 2. Gap Categories
|
||||
|
||||
### 2.1 Requirements Gaps
|
||||
Gaps in system or software requirements that need to be addressed.
|
||||
|
||||
### 2.2 Component Gaps
|
||||
Missing software components or incomplete component specifications.
|
||||
|
||||
### 2.3 Interface Gaps
|
||||
Missing or incompletely defined interfaces between components.
|
||||
|
||||
### 2.4 Architectural Gaps
|
||||
Structural or design gaps in the overall architecture.
|
||||
|
||||
## 3. Identified Gaps
|
||||
|
||||
### 3.1 Requirements Gaps
|
||||
|
||||
#### GAP-REQ-001: Time Synchronization Requirements
|
||||
**Description**: System requirements do not specify time synchronization mechanisms for sensor data timestamping.
|
||||
|
||||
**Impact**: Medium
|
||||
**Priority**: High
|
||||
|
||||
**Details**:
|
||||
- Sensor data requires accurate timestamps for correlation and analysis
|
||||
- No specification for time source (NTP, RTC, GPS, etc.)
|
||||
- No requirements for time accuracy or drift tolerance
|
||||
- No specification for time synchronization between peer sensor hubs
|
||||
|
||||
**Recommendation**:
|
||||
- Add system requirements for time synchronization
|
||||
- Specify time accuracy requirements (e.g., ±1 second)
|
||||
- Define time source priority (NTP > RTC > internal clock)
|
||||
- Add software requirements for time service component
|
||||
|
||||
#### GAP-REQ-002: Power Management Requirements
|
||||
**Description**: Limited requirements for power management and low-power operation modes.
|
||||
|
||||
**Impact**: Medium
|
||||
**Priority**: Medium
|
||||
|
||||
**Details**:
|
||||
- No requirements for sleep modes or power optimization
|
||||
- No specification for power consumption limits
|
||||
- No requirements for battery operation or power failure handling beyond brownout
|
||||
|
||||
**Recommendation**:
|
||||
- Add power management requirements if battery operation is needed
|
||||
- Specify power consumption targets
|
||||
- Define sleep mode behavior and wake-up triggers
|
||||
|
||||
#### GAP-REQ-003: Sensor Calibration Procedures
|
||||
**Description**: Requirements specify calibration management but not calibration procedures.
|
||||
|
||||
**Impact**: Low
|
||||
**Priority**: Medium
|
||||
|
||||
**Details**:
|
||||
- No specification for field calibration procedures
|
||||
- No requirements for calibration validation
|
||||
- No specification for calibration certificate management
|
||||
|
||||
**Recommendation**:
|
||||
- Add requirements for calibration procedures
|
||||
- Specify calibration validation methods
|
||||
- Define calibration traceability requirements
|
||||
|
||||
### 3.2 Component Gaps
|
||||
|
||||
#### GAP-COMP-001: Time Service Component
|
||||
**Description**: No dedicated time service component specified despite time synchronization needs.
|
||||
|
||||
**Impact**: Medium
|
||||
**Priority**: High
|
||||
|
||||
**Details**:
|
||||
- Multiple components need accurate time (Sensor Manager, Diagnostics, etc.)
|
||||
- No centralized time management
|
||||
- No time synchronization service
|
||||
|
||||
**Recommendation**:
|
||||
- Create Time Service component specification
|
||||
- Define interfaces for time access and synchronization
|
||||
- Integrate with NTP client for network time synchronization
|
||||
|
||||
#### GAP-COMP-002: Configuration Manager Component
|
||||
**Description**: Configuration management is distributed across multiple components without central coordination.
|
||||
|
||||
**Impact**: Low
|
||||
**Priority**: Medium
|
||||
|
||||
**Details**:
|
||||
- Machine Constants Manager handles sensor configuration
|
||||
- System configuration scattered across components
|
||||
- No unified configuration validation
|
||||
|
||||
**Recommendation**:
|
||||
- Consider creating unified Configuration Manager
|
||||
- Centralize configuration validation
|
||||
- Provide consistent configuration access interface
|
||||
|
||||
#### GAP-COMP-003: Logging Service Component
|
||||
**Description**: No dedicated logging service for development and debugging support.
|
||||
|
||||
**Impact**: Low
|
||||
**Priority**: Low
|
||||
|
||||
**Details**:
|
||||
- Diagnostics Manager handles error logging
|
||||
- No general-purpose logging for development
|
||||
- No log level management or filtering
|
||||
|
||||
**Recommendation**:
|
||||
- Create Logging Service component for development support
|
||||
- Integrate with diagnostics for production logging
|
||||
- Provide configurable log levels and output destinations
|
||||
|
||||
### 3.3 Interface Gaps
|
||||
|
||||
#### GAP-INT-001: Event System Interface Specification
|
||||
**Description**: Event system is referenced throughout but not fully specified.
|
||||
|
||||
**Impact**: High
|
||||
**Priority**: High
|
||||
|
||||
**Details**:
|
||||
- Multiple components depend on event system
|
||||
- No detailed interface specification
|
||||
- No event type definitions or event routing specification
|
||||
|
||||
**Recommendation**:
|
||||
- Create comprehensive Event System component specification
|
||||
- Define event types, priorities, and routing rules
|
||||
- Specify event subscription and publication interfaces
|
||||
|
||||
#### GAP-INT-002: Hardware Abstraction Layer Interfaces
|
||||
**Description**: HAL interfaces are mentioned but not fully specified.
|
||||
|
||||
**Impact**: Medium
|
||||
**Priority**: Medium
|
||||
|
||||
**Details**:
|
||||
- GPIO, I2C, SPI, ADC wrappers mentioned but not detailed
|
||||
- No standardized HAL interface patterns
|
||||
- No error handling specifications for hardware interfaces
|
||||
|
||||
**Recommendation**:
|
||||
- Create detailed HAL component specifications
|
||||
- Define standard interface patterns for hardware access
|
||||
- Specify error handling and recovery procedures
|
||||
|
||||
#### GAP-INT-003: Inter-Component Communication Patterns
|
||||
**Description**: Communication patterns between components not fully standardized.
|
||||
|
||||
**Impact**: Medium
|
||||
**Priority**: Medium
|
||||
|
||||
**Details**:
|
||||
- Mix of direct calls, events, and message passing
|
||||
- No consistent error handling patterns
|
||||
- No specification for asynchronous vs synchronous communication
|
||||
|
||||
**Recommendation**:
|
||||
- Define standard communication patterns
|
||||
- Specify when to use each pattern
|
||||
- Create communication guidelines and examples
|
||||
|
||||
### 3.4 Architectural Gaps
|
||||
|
||||
#### GAP-ARCH-001: Error Recovery Architecture
|
||||
**Description**: Error handling is specified but error recovery architecture is incomplete.
|
||||
|
||||
**Impact**: Medium
|
||||
**Priority**: Medium
|
||||
|
||||
**Details**:
|
||||
- Individual components handle errors
|
||||
- No system-wide error recovery strategy
|
||||
- No specification for graceful degradation modes
|
||||
|
||||
**Recommendation**:
|
||||
- Define system-wide error recovery architecture
|
||||
- Specify graceful degradation strategies
|
||||
- Create error escalation and recovery procedures
|
||||
|
||||
#### GAP-ARCH-002: Performance Monitoring Architecture
|
||||
**Description**: No architecture for runtime performance monitoring and optimization.
|
||||
|
||||
**Impact**: Low
|
||||
**Priority**: Low
|
||||
|
||||
**Details**:
|
||||
- Performance requirements specified but no monitoring
|
||||
- No runtime performance metrics collection
|
||||
- No performance optimization feedback loop
|
||||
|
||||
**Recommendation**:
|
||||
- Add performance monitoring component
|
||||
- Define performance metrics and collection methods
|
||||
- Create performance optimization procedures
|
||||
|
||||
#### GAP-ARCH-003: Testing Architecture
|
||||
**Description**: Testing strategy defined but testing architecture not specified.
|
||||
|
||||
**Impact**: Medium
|
||||
**Priority**: Medium
|
||||
|
||||
**Details**:
|
||||
- Verification methods specified for requirements
|
||||
- No testing framework architecture
|
||||
- No specification for test automation and CI/CD integration
|
||||
|
||||
**Recommendation**:
|
||||
- Define testing framework architecture
|
||||
- Specify test automation infrastructure
|
||||
- Create CI/CD integration guidelines
|
||||
|
||||
## 4. Gap Prioritization
|
||||
|
||||
### 4.1 Critical Gaps (Must Address)
|
||||
1. **GAP-INT-001**: Event System Interface Specification
|
||||
2. **GAP-COMP-001**: Time Service Component
|
||||
3. **GAP-REQ-001**: Time Synchronization Requirements
|
||||
|
||||
### 4.2 Important Gaps (Should Address)
|
||||
1. **GAP-INT-002**: Hardware Abstraction Layer Interfaces
|
||||
2. **GAP-INT-003**: Inter-Component Communication Patterns
|
||||
3. **GAP-ARCH-001**: Error Recovery Architecture
|
||||
4. **GAP-ARCH-003**: Testing Architecture
|
||||
|
||||
### 4.3 Optional Gaps (Could Address)
|
||||
1. **GAP-REQ-002**: Power Management Requirements
|
||||
2. **GAP-REQ-003**: Sensor Calibration Procedures
|
||||
3. **GAP-COMP-002**: Configuration Manager Component
|
||||
4. **GAP-COMP-003**: Logging Service Component
|
||||
5. **GAP-ARCH-002**: Performance Monitoring Architecture
|
||||
|
||||
## 5. Gap Resolution Plan
|
||||
|
||||
### 5.1 Phase 1: Critical Gaps (Weeks 1-2)
|
||||
- Create Event System component specification
|
||||
- Define Time Service component and interfaces
|
||||
- Add time synchronization requirements
|
||||
|
||||
### 5.2 Phase 2: Important Gaps (Weeks 3-4)
|
||||
- Complete HAL interface specifications
|
||||
- Define inter-component communication patterns
|
||||
- Create error recovery architecture
|
||||
- Define testing framework architecture
|
||||
|
||||
### 5.3 Phase 3: Optional Gaps (Weeks 5-6)
|
||||
- Address remaining gaps based on project priorities
|
||||
- Validate gap resolutions with stakeholders
|
||||
- Update architecture documentation
|
||||
|
||||
## 6. Impact Assessment
|
||||
|
||||
### 6.1 Development Impact
|
||||
- **Critical gaps**: May block development start
|
||||
- **Important gaps**: May cause integration issues
|
||||
- **Optional gaps**: May affect long-term maintainability
|
||||
|
||||
### 6.2 Risk Mitigation
|
||||
- Address critical gaps before implementation begins
|
||||
- Plan important gaps into development phases
|
||||
- Monitor optional gaps for emerging importance
|
||||
|
||||
## 7. Recommendations
|
||||
|
||||
### 7.1 Immediate Actions
|
||||
1. Create Event System specification (GAP-INT-001)
|
||||
2. Define Time Service component (GAP-COMP-001)
|
||||
3. Add time synchronization requirements (GAP-REQ-001)
|
||||
|
||||
### 7.2 Short-term Actions
|
||||
1. Complete HAL specifications (GAP-INT-002)
|
||||
2. Define communication patterns (GAP-INT-003)
|
||||
3. Create error recovery architecture (GAP-ARCH-001)
|
||||
|
||||
### 7.3 Long-term Actions
|
||||
1. Evaluate optional gaps during implementation
|
||||
2. Address gaps based on actual development needs
|
||||
3. Continuously review for new gaps
|
||||
|
||||
## 8. Conclusion
|
||||
|
||||
The identified gaps are manageable and do not represent fundamental architectural flaws. Most gaps are related to detailed specifications that can be addressed during the early implementation phases. The critical gaps should be resolved before development begins to ensure a solid foundation for implementation.
|
||||
|
||||
The gap analysis demonstrates the thoroughness of the architecture review process and provides a clear roadmap for completing the architecture specification. Regular gap reviews should be conducted throughout the development process to identify and address emerging gaps.
|
||||
Reference in New Issue
Block a user